Eaton Remote Power Panel Скачать руководство пользователя страница 62 | Manualshive

Страница: 62 / 64

background image

48

Eaton Remote Power Panel (RPP) User’s Guide 164202125—Rev 5

www.eaton.com/powerquality

OTHER LIMITATIONS: Eaton's obligations under this Warranty are expressly conditioned upon receipt
by Eaton of all payments due to it (including interest charges, if any). During such time as Eaton has
not received payment of any amount due to it for the Product, in accordance with the contract terms
under which the Product is sold, Eaton shall have no obligation under this Warranty. Also during such
time, the period of this Warranty shall continue to run and the expiration of this Warranty shall not be
extended upon payment of any overdue or unpaid amounts.

COSTS NOT RELATED TO WARRANTY:

The End-User shall be invoiced for, and shall pay for, all services

not expressly provided for by the terms of this Warranty, including without limitation site calls involving an
inspection that determines no corrective maintenance is required. Any costs for replacement equipment,
installation, materials, freight charges, travel expenses, or labor of Eaton representatives outside the terms of
this Warranty will be borne by the End-User.

OBTAINING WARRANTY SERVICE:

In the USA, call the Eaton Customer Reliability Center 7x24 at

800-843-9433. Outside of the USA, call your local Eaton sales or service representative, or call the Eaton
Customer Reliability Center in the USA at 919-870-3028. For comments or questions about this Limited
Factory Warranty, write to the Customer Quality Representative, 3301 Spring Forest Road, Raleigh, North
Carolina 27616 USA.

«
...
60
61
62
63
64
»

Содержание Remote Power Panel

































































Отзывы:

Нет отзывов

Похожие инструкции для Remote Power Panel

Бренд: Tripp Lite Страницы: 3

Бренд: Tripp Lite Страницы: 24

Бренд: CAYMON Страницы: 4

VLT Weather Shield

Бренд: Danfoss Страницы: 2

Бренд: XODO Страницы: 16

Бренд: Ekars Страницы: 8

Бренд: ABB Страницы: 36

Бренд: Panamax Страницы: 12

Бренд: ABB Страницы: 34

Бренд: ABB Страницы: 24

QBASE QB4 Mark II

Бренд: Nordost Страницы: 8

Бренд: Tripp Lite Страницы: 3

Бренд: Tripp Lite Страницы: 2

Бренд: Tripp Lite Страницы: 2

PowerVerter APSINT2424

Бренд: Tripp Lite Страницы: 6

Line Conditioner 230V

Бренд: Tripp Lite Страницы: 6

PowerVerter APS 1012

Бренд: Tripp Lite Страницы: 13

Бренд: Tripp Lite Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды