Eaton Remote Power Panel Скачать руководство пользователя страница 15

Страница: 15 / 64

Eaton Remote Power Panel (RPP) User’s Guide 164202125—Rev 5

www.eaton.com/powerquality

Chapter 1

Introduction

The Eaton

Remote Power Panel (RPP) is designed to provide increased distribution capacity in a small,

compact cabinet without the need for costly electrical rework. Providing outstanding performance and
reliability, the Eaton unique benefits include the following:

208V, 60 Hz or 400V, 60Hz power distribution unit, delivering up to 168 branch breakers

Available in a small footprint design for limited space applications or a large footprint design to line up and
match with other data center product.

Standard top or bottom cable entry in a free-standing structure

Easy installation and servicing with front access, spacious wireways, removable side panels, and hinged
interior barriers and exterior doors

Displays located on the exterior doors for ease of use

Standard locking door latches with included key

Firmware that is service upgradable through the DB-9 communication port

Backed by worldwide agency approvals

The following options for the Eaton RPP are available:

Up to four Eaton or Square D

42-pole, three-phase panelboards (two front, two rear). Each panelboard is

protected by a three-pole 225A or 400A, 600V rated breaker.

Up to two Cooper Bussmann Quick-Spec bolt-on 42-pole fusible, three-phase panelboards (one front, one
rear)

225AF Panel Main Switch

200A main fuse

200 kA at 400 Vac

Fused disconnects for branch circuits

Indicating and non-indicating CUBEFuse ratings from 1A to 60A.

80% or 100% rated input breakers with standard, high or ultra-high interrupt capacity:

Standard KAIC (65 kA at 208 Vac or 35 kA at 400 Vac)

High KAIC (100 kA at 208 Vac or 65 kA at 400 Vac)

Note:

100% rated ultra-high interrupt capacity breaker is not available.

Ultra-High KAIC (200 kA at 208 Vac or 100 kA at 400 Vac)

Input connection options:

Direct connection to each 225A panelboard breaker (front and rear)

Connection into a single main lug option (MLO). Each MLO is rated at 450A or 900A and can feed up to
four 225A or 400A panelboards.

Connection into dual main lug option (MLO). Each MLO is rated at 450A or 900A and can feed up to two
225A or 400A

panelboards.

Optional prewired shunt trip terminals can be used to easily connect main breaker shunt trips to emergency
off devices.

Optional prewired auxiliary contact terminals can be used to monitor the breaker open or closed status.

Содержание Remote Power Panel

































































Результаты поиска

Содержание Remote Power Panel

Отзывы:

Похожие инструкции для Remote Power Panel

Бренды по названию

Популярные бренды

Eaton Remote Power Panel, Руководство пользователя

Результаты поиска

Содержание Remote Power Panel

Отзывы:

Похожие инструкции для Remote Power Panel

Бренды по названию

Популярные бренды