Eaton POWERWARE Plus 18, Руководство пользователя

Страница: 76 / 311

System Operation
Plus 18
Comm Setup
Allows the serial port to be used with a or in one of the computer
modes.
following menus used to setup
. Output Mode
l
l
For each of these menus a list of set up parameters can be viewed by using the UP or
DOWN arrow key. To change a parameter the
and RIGHT arrow keys should be
used view options and the key pressed to change to the currently
Output Mode
modes are: ASCII Computer; Binary Computer; Printer; Terminal.
setup Port
The I/O port may by be set to: Software Handshaking. Note It
is possible not to have any of these selected.
Used to allow the communications portparameters to be set individually.
items are: Baud Hardware Software Handshaking Parity; and Data
S k ’
S e t u p
Used to change the rear panel relays available options
Display Current Setup, A/S 400. &T/Default 1. Custom.
Set Language
Used to select the language used for the display. The selections are English, French,
German, Spanish, and Portuguese. Use the UP or DOWN arrow keys to view the options
S e t
(minutes to hours, etc.) Use the UP and DOWN arrow keys to change and the
Adjust
Used to adjust the LCD contrast for visibility. Use the UP and DOWN arrow keys
to vary the contrast.
43.16
Volume
The horn volume is controlled by this entry. To select OR
key to save it. Upon this the horn will beep with the new volume.
4-38 CONFIDENTIAL