Eaton POWERWARE Plus 18, Руководство пользователя

Страница: 75 / 311

18
Operation
43.5 Password
Factory setpassword must be to access System Set-Up options. After entering a
valid password, the System Set-Up menu will be displayed. factory set user
password is MEMORY. The factory service password is INSECT.
43.6 System Set-up
Used to set up the UPS. From the SYSTEM use key to return
to the MAIN MENU. In when altering the settings under the
menu. the key will save a change and the key will abort, leaving the
setting it was. asterisk displayed on the left side indicates the presently
item.
43.7 Select
Used to select the output voltage, output phase, and output frequency type for the UPS.
Use the
and arrow keys to display all options for each category. Press the
SBLBCT button to save rating can be viewed but not changed.
43.8 W. Modules
Used view and change the current system configuration. The entries are:
l
l # o u t p u t & ~
l Installed
l
. Installed
* Item may be viewed, but
not changed.
To view the the or DOWN key. To view
options available for each the or arrow key is pressed. To
choose an option other than the one presently selected press the key while the
option is being displayed. To return to the System Setup Menu, press the Menu key.
43.9 Sync Range
The range, in which the input frequency may vary the selected output
and still have bypass available. The value is from 0.5 3.0 Hz. The
and DOWN arrow keys between the key sets the new
value.
43.10 Adj Out Volts
Used adjust the unit’s output voltage by 5% of the nominal output voltage. When
the present output and the deviation the nominal voltage is
displayed.
output voltage.
ELECTRONICS 4-37