Eaton POWERWARE Plus 18, Руководство пользователя

Страница: 113 / 311

Communications
Plus 18
The
final piece of data on a line is the line checksum denoted here by ‘CC’. This is a
two’s complement byte checksum. The checksum is calculated by summing the block
number byte, the two block offset bytes, and the 16 data bytes together and taking the
two’s complement of this value which becomes the line checksum. Like the data bytes,
this value is converted into two ASCII characters for transmission.
Each line of data is terminated by a return (OD Hex) line feed (OA
represented by ‘xx’.
The 18 space characters shown between the are also
6.3J.I Black
The ID block contains general information about the UPS and the data blocks which can
be requested. ID block is sent periodically every two minutes the UPS receives
command to the UPS in ASCII computer mode. The only between the
periodic and requested ID data blocks is periodic ID data block preempts any
requested data block currently interruption of the requested block
entirety, the interrupted requested data block is to continue. periodic
ID block can be by the Alarm block which is the highest priority.
The block number for the ID ‘01’. The JD block consists of roughly eight
block describing the ‘type. The number of in the unit, the unit’s
ID block. Remember; byte into two ASCII character bytes which
transmitted.
Block
requested
for the Alarm block is ‘02’. If the alarm queue is empty, this data consists
number of entries in the history queue. Each queue is
converted into nine data maximum of entries is by the
which to 225 of
dam
in ASCII computer mode. Remember Each data
byte is converted into two character bytes which are transmitted.
6.3.Z.3
The block contains data describing the UPS status. The block number for the
block is ‘03’. To request this block send an command in ASCII computer
mode.
6-16