INSTALLATION
EATON
Powerware
®
5125 Two-in-One EBM (2400/3000 VA) User’s Guide
S
164201378 Rev C
www.power-
ware.com
17
Tower Installation
The mounting brackets must be removed before positioning the
cabinets for a tower installation. Unscrew and remove the mounting
brackets on each side of all cabinets as shown in Figure 4.
Mounting
Bracket
Figure 4. Removing the Mounting Brackets
The setup varies depending on the number of cabinets you are installing:
1.
For two cabinets,
the pedestals and the joining brackets must be
installed. Skip to Step 2.
For three or more cabinets,
the joining brackets must be installed. Skip
to Step 6.
2.
Place the UPS cabinet horizontally so that the left end of the cabinet
is accessible (see Figure 5).
Figure 5. Installing UPS Pedestals (for Two Cabinets)
3.
Align the pedestals with the screw holes on the end of the UPS
cabinet. Secure the pedestals with the screws provided in the
accessory kit.
