Eaton Oxalis XP Series Скачать руководство пользователя страница 6

Страница: 6 / 22

EATON

Installation & Maintenance Instructions

IMI+70-XP-XT Iss_A

Page 6 of 24

2.1

Versions

There are different camera options available within the range; these include Day/Night cameras with

optional wiper, integral washer or external washer, thermal imager and dual camera day/night, Smart IR

illuminator and thermal units.

The range also includes options for standard analogue video and data, HD IP cameras, hybrid IP encoders,

digital fiber optic convertors and media convertors.

Due to the large number of possible configurations, this manual only covers the standard installation of the

units.

For detailed connection and configuration of units, the installer should refer to individual project specific

drawings and information.

2.2

Supplied Equipment

Contained in the package are the following items:

•

Camera system

•

Installation/Technical Manual

•

Optional Sunshield and Fixings

•

Optional Washer Nozzle Kit

2.3

Recommended Tools

For installation and maintenance purposes, we recommend the following hand tools:

•

Voltmeter/Ohmmeter

•

Torque wrench kit

Set to 7.5Nm, Hex Allen wrench bits of 5, 4 & 3mm

•

Spanners

8mm, 10mm & 13mm A/F

•

Screw drivers

standard and Phillips head

•

Pliers

side cutting and long nose

2.4

Recommended Spares

For Maintenance purposes, we recommend the following spares:

PX99903784 LW PTZ FLANGE SEAL KIT

PX99902859 WIPER BLADE ASSEMBLY

PX99903785 LW PTZ WASHER NOZZLE KIT

PX99903786 MK3 BASE ENTRY O-RING 111mm x2.5mm

Содержание Oxalis XP Series























Результаты поиска

Содержание Oxalis XP Series

Отзывы:

Похожие инструкции для Oxalis XP Series

Бренды по названию

Популярные бренды

Eaton Oxalis XP Series, Инструкция по установке и обслуживанию

Результаты поиска

Содержание Oxalis XP Series

Отзывы:

Похожие инструкции для Oxalis XP Series

Бренды по названию

Популярные бренды