25
Maintenance
Recommended inspection interval: 6 Months.
Inspect the unit regularly every six months to ensure trouble free operation and extended product life.
Due to the rugged construction of the unit, little or no maintenance should be required.
It is recommended that, where the unit is exposed to regularly extreme weather conditions, the ‘O’ ring
weather seals in the removable window covers, removable enclosure covers, and base junction box are
replaced every five years.
Fixings and fastenings should be checked for tightness and integrity at regular intervals.
All cable entries and cables should be checked for integrity at regular intervals.
Extremely harsh environments may require more frequent inspection and maintenance checks.
Therefore, the end user or installer shall ensure that this equipment is protected against external influences
which could adversely affect the explosion protection or contact the manufacturer if in doubt of the
suitability of this equipment in the environment in which it is to be installed.
At every Inspection carry out the following:
•
Clean the exterior of the unit.
•
Check the ‘O’ ring weather seals and replace if necessary.
•
Check, and if necessary, replace the washer nozzle.
•
Check, and if necessary, replace the window wiper blade assembly.
•
Use only Eaton approved spare parts.
