Eaton MPAD-C-A Скачать руководство пользователя

Страница: 2 / 8

Detection diagram

Detection Mode

The Detection Mode can be set to behave in Presence or Absence mode:



Presence

When movement is detected the load will automatically turn on. When the area is no longer

occupied the load will automatically switch off after an adjustable time period.



Absence

The load is manually switched on. When the area is no longer occupied the load will automatically

switch off after the adjustable time period has elapsed.

In either case, sensitivity to movement of the Microwave sensor can be adjusted using the Sensitivity parameter.

HINT: To assist in setting the Sensitivity, turn on the Walk Test LED which will flash red when movement is detected.
Switch Level On/Off

Occupancy detection can be made dependant on the ambient light level using the Lux On Level and Lux Off Level
parameters.

Sensor functionality

Ideal for large office or classroom

Ideal for corridor or aisle applications

Ideal for open plan areas and offices

Note. If the range is compromised by the ceiling construction /
material. Add the supplied 20mm spacer ring. See page 4 for
fitting details.

Содержание MPAD-C-A








