Eaton MP-3000 Скачать руководство пользователя страница 6

Страница: 6 / 100

IM02602002E

Page

1-2

www.eaton.com

MP-3000

13. Download settings or retrieve metered and historical values via

the communications port.

14. Flexible user-configurable inputs and outputs for broader applica

tion.

15. Options for transition function control and monitoring on time

and/or current.

16. Emergency override function resets jogging limit functions and

clears thermal model bucket to permit restart with a time-tagged

event log. Unit uses a secured button; this function can be dis

abled.

17. Relay can be programmed while motor runs, and new settings

are all put into effect at once in a controlled fashion. Or, User can

set unit so programming is allowed only after motor stop.

1.3 Use of This Manual

This manual contains the following sections:

Section 1 - Introduction - Describes the upgrade changes

from the existing IQ-1000II to the MP-3000, including retrofit

and new features list.

Section 2 - Product Overview - Benefits, feature list, use of

manual, and list of options.

Section 3 - Specifications - Provides hardware specifics

Section 4 - Operator Panel - Describes the pushbuttons,

LEDs, display window, and security door on the MP-3000’s

faceplate, plus the different modes of operation and detailed

mode description tables.

Section 5 - Programming the MP-3000 - Gives specific guid

ance for selecting setting values.

Section 6 - Installation and Wiring - Outlines procedures for

the plant electrician to follow when installing and wiring the

MP-3000.

Section 7 - Startup - Lists step-by-step procedures for ener

gizing the MP-3000 for the first time after installation.

Section 8 - Motor Thermal Protection Basics - Gives an

overview of how the hardware and software function to

gether to control, monitor, and protect the motor.

Section 9 - Application and Settings - Is intended as an aid

to the application engineer considering how and when to

apply the various features of the MP-3000.

Section 10 - Data Communications - Describes what is

needed for the MP-3000 to communicate with host com

puter systems.

•

Section 11 - Testing - Describes how to use the MP-3000

test functions and details recommended maintenance.

Section 12 - Troubleshooting - Provides information on how

to use the Operator Panel to recognize malfunctions. Also,

gives specific troubleshooting procedures.

Section 13 - Drawout Case Option - Describes installing and

using MP-3000 drawout case models.

When the User is familair with the basics of operating the MP-3000,

Tables 4.1 through 4.5 should be used as guides to program and

monitor the relay.

The following accessories and options are covered in other instruction

manuals:

Table 1.1 MP-3000 accessories and Options.

URTD module for

connecting RTDs

to MP-3000

(1)

I.L. 17367

IQ DC Power Supply,

100-150 Vdc

I.L. 17286

INCOM PONI (IPONI)

I.L. 17547

Ethernet PONI (EPONI)

I.L. 17560

Other PONI Types

Consult Eaton distributor or

Eaton.com website

DPONI Types

I.L. 17559

(1)

This MP-3000 instruction manual (IM) gives all basic informa

tion on installing the URTD module.

NOTE: Some manuals will be supplied electronically on the CD

shipped with the MP-3000.

•

Содержание MP-3000





































































































Результаты поиска

Содержание MP-3000

Отзывы:

Похожие инструкции для MP-3000

Бренды по названию

Популярные бренды

Eaton MP-3000, Инструкция

Результаты поиска

Содержание MP-3000

Отзывы:

Похожие инструкции для MP-3000

Бренды по названию

Популярные бренды