Eaton MP-3000, Руководство пользователя, Страница: 23 / 123

I.L. 17562
Page 23
PR 0.3 Effective 8/99
Table 4.3 View Settings Mode/Program Worksheet
Program Date __________ Control
Schematic_________________________________________
Unit ID / Starter Type _________________________ Work Order # _______________________
Motor HP __________ Mfgr. __________ Serial # ______________Volts___________________
FLA __________ LRC ___________ Stall Time/LRT ____________Accel Time
______________
SF ___________________RTD Type __________________ Other
________________________
Line
No. Display Help Message Setpoint
Range/ Value
Selection Value as
shipped Selected Value
Page 1 SP MOTOR SETPOINTS FOR MOTOR CONSTANTS
1 FLA XXXX FULL LOAD AMPS 10-3000 amps (1
amp.
increments) 10
2 LRC XXXX LOCKED ROTOR CURRENT
% OF FLA 300-1200 % (1
% increments) 300
3 LRT
XXX
MAXIMUM ALLOWABLE
STALL TIME IN SECONDS 1-120 sec. (1
sec. increments) 1
4 UTC XXX ULTIMATE TRIP CURRENT IN
% FLA 85-150% (1%
increments) 85
5 PCT XXXX PHASE CT RATIO
NUMERATOR IN PRIMARY
AMP 10-4000 A
(increments of 1) 10
6 GCT XXXX GROUND CT RATIO
NUMERATOR IN PRIMARY
AMP 10-4000 A
(increments of 1) 50
7 FREQ 50
or
FREQ 60
50 OR 60 HERTZ LINE
FREQUENCY Toggles between
FREQ 50 and
FREQ 60 FREQ 60
8 REV
or
NON REV
REVERSING OR
NONREVERSING STARTER Toggles between
REV and
NONREV NONREV
Page 2 SP RTD SETPOINTS FOR RTD INPUTS
1 RTD IN C
or
RTD IN F
DISPLAYED IN DEGREES C
OR F Toggles between
RTD IN C and
RTD IN F RTD IN C
2 WD T XXX WINDING TEMP TRIP 0-199°C, OFF /
32-390°F, OFF
(1°increments) 100
3 WD A XXX WINDING TEMP ALARM 0-199°C, OFF /
32-390°F, OFF
(1°increments) 80