![background image](http://html1.mh-extra.com/html/eaton/moeller-dil-swd-32-002/moeller-dil-swd-32-002_application_524873005.webp)
Publication Number AD05006002E
Page 5
Connect the SmartWire-DT Ethernet gateway to the SmartWire devices and
apply power.
Note: the connected devices must match the offline
configuration you set up in your project.
Connect the SmartWire-DT Ethernet
gateway to your PC using the EU4A-RJ45-USB-CAB1 cable or equivalent.
There is an icon on the tool bar above with an arrow pointing to it that allows
toggling between the Project and the Communication views. Or, under the View
drop down menu, select Communication View to toggle between the Project and
Communication views.
This icon contains a gear and if you hold the cursor over it the following appears:
Communication View (Ctrl + Alt + 1)
Toggles between Project and
Communication View
Click this icon and the following will be displayed:
Choose the communication port where the cable between the PC and the
SmartWire-DT gateway is connected. If using the EU4A-RJ45-USB-CAB1 USB
cable, choose the virtual comm port the USB port has been mapped to. Click
Online to go online with the Ethernet gateway.