Page 8
SK-90510-Y4_EN
2. Presentation
2.2 Description / Panels
The HotSwap MBP has a manual Bypass rotary switch with two positions:
•
UPS
the load is supplied by the UPS
•
Bypass
the load is supplied directly by the AC power source
On MBP11Ki and MBP11Ki31, it is possible to Bypass the load on a separate Bypass AC source
(see 4.3 for more details)
2 lights indicate the HotSwap MBP power status:
•
"
UPS supply
" green light: when active, the UPS output is available, the Bypass switch can be safely
turned to UPS position
•
"
Bypass mode
" red light: when active, indicates that the HotSwap MBP is on “Bypass mode” (Bypass
switch turned to Bypass position)
Normal AC source switch / Bypass AC source switch (following MBP versions):
Allow to safely switch off the AC source of the UPS, for UPS maintenance / replacing
MBP status detection:
A signal cable, with RJ11 connector to plug to the UPS, allows the communication to the UPS to manage
the MBP status, and the indication on UPS display panel of both following status:
•
MBP connection to UPS
•
Bypass switch position
Check the UPS user manual to check the compatibility of this feature, or contact Eaton reseller for more
information
MBP6Ki
MBP11Ki / MBP11Ki31
(1)
Input/Output terminal blocks
(2)
Normal AC source switch
(3)
Input/Output/MBP-Detection
connector to the UPS
(4)
Manual Bypass switch
(5)
(2) 16A outlets
(6)
(3) 10A outlets
(7)
UPS supply green light
(8)
"Bypass" mode red light
(1)
Input/Output terminal blocks
(2)
Input/Output cables for
connection to the UPS
(3)
Bypass terminal blocks for
connection to the UPS
(4)
Normal AC source switch
(5)
Bypass AC source switch
(6)
Signal cable for MBP detection to
the UPS
(7)
Manual Bypass switch
(8)
(4) 16A outlets
(9)
UPS supply green light
(10)
"Bypass" mode red light
7
8
5
3
4
1
2
6
8
10
9
2
6
3
5
1
7
4
Содержание MBP11Ki
Страница 20: ...Page 20 SK 90510 Y4_EN...
