Eaton Malux solutions ResistTel IP4 Скачать руководство пользователя страница 54

Страница: 54 / 64

Operating instructions ResistTel IP4/IP162

03/22

the other user-specific settings of the new user also take effect. Depending on the chosen activation

method

Act.next reg.

the user specified in

Reg.ID

or the next user registered in the user list is acti-

vated.

Type:

Activate

. Selection parameter set to function type

Activate

Text:

......................... Input parameters for the optional definition of labeling texts.

Icon:

......................... Selection parameter for the optional definition of pictograms.

Reg.ID:

...................... Input parameters for defining the user number 0 ≤ nz ≤ 5. In this function, the

user numbers are numbered starting with 0; so enter 0 for user 1, 1 for user 2,

and so on.

Disable act.reg.:

...... Selection element for specifying the additional deactivation option

Off

Option is switched off, previously active user remains logged in.

Option is switched on, previously active user is logged out.

Act.next reg.:

.......... Selection element for specifying the activation method.

Off

Function activates the user specified in the

Reg.ID

parameter.

Function activates the next logged in user in the user list; the

Reg.ID

setting

is irrelevant.

"Ringing off" function for selected key f

Function key f controls call protection on/off. Activated do-not-disturb is symbolized by the pictogram

that is shown in the display area when the device is idle.

Type:

Ringing off

. Selection parameter set to function type

Ringing off

State:

....................... Selection element for setting the functional state

Call protection is turned off

Call protection is turned on

Text:

[1] [2]

..................... Input parameters for optional specification of labeling texts.

Icon:

[1] [2]

..................... Selection parameter for the optional definition of pictograms.

LED:

[2]

......................... Selection parameter for defining the LED operating mode in state 2

Do not disturb

.......... Open the following dialog to set call protection

Action:

..................... Selection parameter for specifying the action to be taken when do-not-dis-

turb is activated and incoming calls are received.

Ringing off

The acoustic tone signaling (ringing) is switched off

Silence

The acoustic tone signaling (ringing) and the optical signaling of the call
in the display are switched off.

Busy

Like the

Silence

setting, but the phone behaves to the caller as if it were

busy.

For:

.......................... Selection parameters to specify the calls for which call protection is enabled.

Every call

Call protection is to be applied to all calls.

External calls

Call protection is to be applied to external calls.

Internal calls

Call protection is to be applied to internal calls.

Function "Call waiting" for selected key f

Function key f controls activation/deactivation of the call waiting function, with which incoming calls can
be signaled optically and acoustically when a connection is already established.

Type:

Call waiting

. Selection parameter set to function type

Call waiting

Содержание Malux solutions ResistTel IP4

































































Результаты поиска

Содержание Malux solutions ResistTel IP4

Отзывы:

Похожие инструкции для Malux solutions ResistTel IP4

Бренды по названию

Популярные бренды

Eaton Malux solutions ResistTel IP4, Руководство по эксплуатации

Результаты поиска

Содержание Malux solutions ResistTel IP4

Отзывы:

Похожие инструкции для Malux solutions ResistTel IP4

Бренды по названию

Популярные бренды