Operating instructions ResistTel IP4/IP162
03/22
50
functional status to change. In the example, successive presses toggle the
feature on and off continuously.
1
Feature is turned off.
Functional description for state 1.
2
Feature is turned on.
Functional description for state 2.
Text:
[
1] [2]
..................... Input parameters for optional specification of labeling texts.
No effect on the ResistTel IP4/IP162, except for
Text
[1]
, which replaces the
standard labeling of the f key in the function key list.
Icon:
[1] [2]
..................... Selection parameter for the optional definition of pictograms.
With ResistTel IP4/IP162 without effect.
LED:
[
2]
........................ Selection parameter for defining the LED operating mode in state 2
With ResistTel IP4/IP162 without effect.
Function "Destination no. " for selected key f
Function key f causes the call of the subscriber number defined in the following dialog.
Type:Destination no.
Selection parameter set to function type
Destination no.
Text:
......................... Input parameters for optional specification of labeling texts.
Icon:
......................... Selection parameter for the optional definition of pictograms.
Number:
...................... Input parameters for specifying the destination phone number and optional
Dtmf characters that are transmitted to the destination phone after the connec-
tion has been established. The optional Dtmf characters are to be added to the
destination phone number, separated by a comma.
4711
Destination number
4711,*101#
Destination number with trailing Dtmf
character transmission
Prepare:
.................... Selection parameter for specifying the functional sequence that is to be exe-
cuted when the key is pressed.
Off
Destination number is dialed immediately.
On
Destination phone number is copied into the dialling preparation and can be
changed/extended manually; the dialling process itself must also be trig-
gered manually.
Partner function for selected key f
Function monitors the state of the partner telephone specified here and when the function key f is
pressed when the partner telephone is idle, it makes a direct call, when there is a call it picks up the
call and when there is a call it also makes a direct call (call waiting).
Type:
Partner
. Selection parameter set to function type
Partner
.
Text:
......................... Input parameter for optional specification of labeling texts.
Icon:
......................... Selection parameter for the optional definition of pictograms.
Number:
...................... Input parameter for specifying the destination phone number.
Display number
........ Open the dialog below to define the partner statuses that are to be shown in
the display of this telephone.
calling:
................... Selection parameter to display the partner status "calling".
Off
Partner state "calling" is not displayed.
On
Partner state "calling" is displayed.
connected:
................ Selection parameter to display the partner status "connected".
Off
Partner state "connected" is not displayed.
On
Partner state "connected" is displayed.
