Operating instructions ResistTel IP4/IP162
03/22
51
Presence:
.................. Selection parameters to display partner availability
Off
Partner availability is not displayed.
On
Partner availability is displayed.
Preconditions
The PBX used must support the partner function feature, both phones must belong to the same
group and the partner function must be activated.
"Park" function for selected key f
Function key f causes a connection to be parked at the position specified in the dialog. When you press
the button, your call partner is parked, you end the connection, e.g. by hanging up the handset, and
then pick up the call again on the telephone specified in the dialog.
Type:
Park
. Selection parameter set to function type
Park
.
Text:
......................... Input parameters for optional specification of labeling texts.
Icon:
......................... Selection parameter for the optional definition of pictograms.
Number:
...................... Input parameter to define the phone number of the object where the call is to
be parked.
Position:
.................. Input parameter to specify an additional parking position, typically 0.
Display number
........ Open the following dialog to set display options.
calling:
................... Selection parameter to specify the display option "calling".
Off
Display the number of the parked subscriber.
On
Suppress the number of the parked subscriber.
Pickup function for selected key f
Function monitors the status of the telephones in your own call group and signals calls to these tele-
phones on the display. Function key f accepts these optically signaled calls. Calls from telephones in the
call group are shown in the form
CGPN
CDPN
(caller
callee) at the bottom right of the display area. If
several calls are made at the same time, a list of
CGPN
CDPN
entries is displayed from which the call
can be selected that is to be answered by pressing the function key f.
Type:
Pickup
. Selection parameter set to function type
Pickup
State:
....................... Selection element for setting the functional state
1
Telephones in the call group are idle or busy, pressing the function key f has
no effect.
2
At least one telephone in the call group is called. Pressing the function key f
causes this call to be accepted.
Text:
[1] [2]
..................... Input parameters for the optional definition of labeling text.
Icon:
[1] [2]
..................... Selection parameter for defining a pictogram.
LED:
[2]
......................... Selection parameter for defining the LED operating mode in state 2
Display number
.......... Open the dialog below to specify the call signalling.
calling:
................... Selection parameter for specifying the call signalling.
Off
Call signaling takes place in the form
CDPN
.
On
Call signaling is in the form
CGPN
CDPN
.
