Eaton INDGW-X2, Руководство пользователя

Страница: 139 / 273

Maintenance
Contextual help of the web interface – 141
•
•
•
•
•
•
STEP 1: Connect to the Network Module.
On a network computer, launch a supported web browser. The browser window appears.
In the Address/Location field, enter: https://xxx.xxx.xxx.xxx/ where xxx.xxx.xxx.xxx is the static IP address of the
Network Module.
The log in screen appears.
Enter the user name in the User Name field.
Enter the password in the Password field.
Click Login. The Network Module web interface appears.
STEP 2: Navigate to Protection/Agents list page.
STEP 3: In the Pairing with shutdown agents section, select the time to accept new agents and press the Start button
and Continue. During the selected timeframe, new agent connections to the Network Module are automatically trusted and
accepted.
STEP 4: Action on the agent ( IPP/IPM ) while the time to accepts new agents is running on the Network Module
Remove the Network module certificate file(s) *.0 that is (are) located in the folder
Eaton\IntelligentPowerProtector\configs\tls.
Card wrong timestamp leads to "Full acquisition has failed" error message on Software
Symptoms:
IPP/IPM shows the error message "The full data acquisition has failed" even if the credentials are correct.
Possible cause:
The Network module timestamp is not correct.
Probably the MQTT certificate is not valid at Network module date.
Action:
Set the right date, time and timezone. If possible, use a NTP server, refer to Contextual
help>>>Settings>>>General>>>System details>>>Time & date settings section.
3.7.7.8.1 For other issues
3.8 Maintenance
For manual pairing (maximum security), go to Servicing the Network Management Module >>>Pairing agent
to the Network Module
section and then go to STEP 2, item 1.
For details on other issues, see the Troubleshooting section.