40
GREEN MOTION DC 22 EV CHARGER INSTALLATION MANUAL
MN192004EN November 2022 www.eaton.com
00 Title
8.5 Dismount
8.6 Station updates
Step 1.
Disconnect any load if present.
Step 2.
Open the housing by removing the fixing screws as described in section 8.1.
Step 3.
Disconnect GRID terminal block from the AC grid
Step 4.
Disconnect the communication cables and external controls where present.
Step 5.
Dismount the floor-mounted pedestal if present.
Step 6.
The product can now be removed for disposal or repair.
It is mandatory to install and maintain the units with the latest system updates to enable new features and
bug fixes, or the guarantee conditions may be voided.
For units that are online, this must be done via the Eaton Charging network manager software platform.
Please refer to the Eaton Charging network manager user manual, available on www.eaton.com, for further
details. For units that are offline, please contact your Eaton service representative using the email address
The EU Directive on Waste Electrical and Electronic Equipment (WEEE) (Directive 2012/19/EU) establishes
common rules on the management of electrical and electronic equipment and minimizes its impact – from
design until disposal – on the environment. As a manufacturer of electrical and electronic equipment, Eaton
actively supports the requirements of the WEEE Directive.
In compliance with the EU standard EN 50419 for marking of electrical and electronic equipment, we include
the crossed-out wheeled bin symbol on our products. This symbol alerts users that these products should
be recycled in accordance with local environmental regulations and not discarded with household waste.
When end users recycle WEEE they are helping to ensure that they are neither incinerated nor sent to
landfill, minimizing the potential negative impact on human health and the environment.
Any device that is no longer needed must therefore be returned to the distributor or disposed of via an
authorized collection and recycling center in the area. Eaton encourages all its customers and end users to
make responsible decisions when disposing of products.
Eaton is not responsible for the transportation of the device to the collection point or recycling center.
When the EV charger reaches the end of its service life, the end user should contact professional and qualified
personnel for disposal instructions.
Please refer to
www.eaton.com/recycling
for further details.
Before starting any maintenance operations, ensure the system has been switched off, and that the AC-line
external main switch has been set to off. Disconnect the unit from the power supply and wait at least 10
minutes to allow its components to cool down and any static electricity storage devices to discharge, before
removing the unit. The housing could be heated by direct sunlight and it can cause burns by contact. Please
use suitable PPE or wait for the equipment to cool down before accessing it.
To uninstall the unit:
8.7 Disposal
