Eaton Green Motion DC 22 Скачать руководство пользователя страница 30

Страница: 30 / 48

GREEN MOTION DC 22 EV CHARGER INSTALLATION MANUAL

MN192004EN November 2022 www.eaton.com

00 Title

6.3 Electrical connection and terminals

Follow the next steps to connect the EV charger to the power supply:

Step 1.

Open the door of the EV charger. Please refer to Chapter 8.1 of this manual to open the Green Motion DC 22

EV charger housing.

Step 2.

Remove the cable glands from the cables if necessary and insert AC grid power cables into the unit (see

Figure 21). The cable entries for power and communication cables are from the bottom-left side or from the

rear-left side of the EV charger. There are three possible knockout holes for the power cable and three possible

knockout holes for the ethernet cable as shown in Figure 21. Holes numbered 1 and 4 in Figure 21 are intended

for use with a floor-mounted EV charger. To feed the cables into the EV charger, knock out one of the holes for

the power cable and one for the Ethernet cable.

Before starting the connection operations, ensure the external AC-line main switch is disconnected, and

circuit breakers are open.
It is not possible to install the EV charger in an IT grid.

Figure 21. Where to introduce the power supply and communication cables inside the unit

Tag

Description

Cable entry for input power cable when mounted on pedestal

2 3

Alternative cable entry for input power cable

Cable entry for the ethernet cable when mounted on pedestal

5 6

Alternative cable entry for the Ethernet cable

Emergency stop button

Содержание Green Motion DC 22

















































Результаты поиска

Содержание Green Motion DC 22

Отзывы:

Похожие инструкции для Green Motion DC 22

Бренды по названию

Популярные бренды

Eaton Green Motion DC 22, Руководство по установке

Результаты поиска

Содержание Green Motion DC 22

Отзывы:

Похожие инструкции для Green Motion DC 22

Бренды по названию

Популярные бренды