Eaton eNMC2, Руководство пользователя, Страница: 61 / 231

Environment
Contextual help of the web interface – 61
3.6.2.3.1 Actions
a Set Enabled
Enable the alarm first and then change the setting in the table and then Save.
When disabled, no alarm will be sent.
b Set alarm severity
Enable the alarm first and then change the setting in the table and then Save.
When the dry contacts is not in a normal position, an alarm will be sent at the selected level.
The dry contact is open and this is not normal because it is configured as normally close.
The dry contact is close and this is not normal because it is configured as normally open.
3.6.2.4 Default settings and possible parameters - Environment Alarm configuration
Default setting Possible parameters
Temperature Enabled — No
Low critical – 0°C/32°F
Low warning – 10°C/50°F
High warning – 70°C/158°F
High critical – 80°C/176°F
Enabled — No/Yes
low critical<low warning<high warning<high critical
Humidity Enabled — No
Low critical – 10%
Low warning – 20%
High warning – 80%
High critical – 90%
Enabled — No/Yes
0%<low critical<low warning<high warning<high
critical<100%
Dry contacts Enabled — No
Alarm severity – Warning
Enabled — No/Yes
Alarm severity – Info/Warning/Critical
3.6.2.4.1 For other settings
3.6.2.5 Access rights per profiles
Administrator Operator Viewer
Environment/Alarm
configuration
For other settings, see the Information>>>Default settings parameters section.