
7
Instruction leaflet
IL05407001E
Effective October 2010
E5-648-C446x electronic preset
counter with four presets (relays)
LCD negative, red-green backlighting
eaton corporation
www.eaton.com
Lock input
When the Lock input is activated
the programming is inhibited
When the Lock input is activated the
setting of the preset values is inhibited
When the Lock input is activated the
setting of the preset values and the
programming are both inhibited
7.8.4.2 Main menu for output operations
Main menu for determining the operation
of the outputs
Count mode ADD
Outputs active when
count status ≥ preset value
Reset to zero
Count mode SUBTRACT
Outputs 1, 3 and 4 active when
count status ≤ preset values 1, 3 and 4
Output 2 active when count status ≤0
Reset to preset 2
Count mode ADDING
with automatic reset
Outputs 1, 3 and 4 active when
count status ≥ preset values 1, 3 and 4
Output 2 (timed signal) active when
count status = preset value 2
Automatic reset to zero when
count status = preset value 2
Reset to zero
Count mode SUBTRACTING
with automatic reset
Outputs 1, 3 and 4 active when
count status ≤ preset value 1, 3 and 4
Output 2 (timed signal) active when
count status = 0
Automatic reset to preset 2 when
count status = 0
Reset to preset 2
Count mode ADDING with automatic
reset and Batch counter
Output 2 (timed signal) active when
main counter = preset value 2
Automatic reset to zero when
main counter = preset 2
Output 3 active when
main counter ≥ preset value 3
Batch counter counts the number
of automatic repetitions of preset 2
Output 1 resp. 4 active when
batch counter ≥ preset 1 resp. 4
Manual reset sets both counters to zero.
Electrical reset only sets the main counter
to zero
Count mode ADDING with automatic
reset and Total counter
Output 2 (timed signal) active when
main counter = preset value 2
Automatic reset to zero when
main counter = preset value 2
Output 3 active when
main counter ≥ preset value 3
Total counter counts all the
count pulses from the main counter
Output 1 resp. 4 active when
total counter ≥ preset value 1 resp. 4
Manual Reset sets both counters to zero
Electrical reset only sets the main counter
to zero
7.8.4.3 Main menu for configuration
Main menu for matching the
input pulses and display
Multiplication factor
Multiplication factor can be programmed
from 00.0001 to 99.9999. The setting
00.0000 will not be accepted
Division factor
Division factor can be programmed from
01.0000 to 99.9999. The setting <01.0000
will not be accepted
Decimal point setting
Decimal point (only optical function)
0
no decimal place
0.0
1 decimal place
0.00
2 decimal places
0.000
3 decimal places
0.0000 4 decimal places
0.00000 5 decimal places
Set value
Set value can be programmed
from –999999 to 999999
A previously programmed
decimal point will be displayed