Eaton Cuttler-Hammer Addressable Relay II, Инструкция

Страница: 6 / 8

IL17435 Rev. C
Page 1-4 Effective Date: 1/05
Addressable Relay II
Page 1-4 For more information visit: www.eatonelectrical.com Effective Date: 1/05
9.0 TROUBLESHOOTING
If the unit does not operate properly check the following:
1) Check to see if all wires are securely connected to the
Addressable Relay II.
2) Check the baud rate selection.
3) Check the INCOM network wiring.
4) Check to see that the address is set correctly.
5) Check to see that the software is configured correctly.
There are no user serviceable parts on the Addressable
Relay II. The user should not attempt servicing this
equipment. Please contact your local Cutler-Hammer
representative or the Power Quality Technical Support
Center (PQTSC) for service information.
10.0 TECHNICAL ASSISTANCE
For additional information, technical assistance or referral
to a local authorize distributor, contact Power Quality
Technical Support Center (PQTSC) at 1-800-809-2772,
option 1 / option 1 (outside the United States please call
1-414-449-7100 option 1 / option 1). You can also e-mail
us at pmpapps@eaton.com or visit us on the web,
www.cutler-hammer.eaton.com, and follow the power
management product link.
You can also access our searchable database C-H eXpert
that provides self-help solutions with troubleshooting
information. Simply connect to the C-H eXpert Web site at
http://chexpert.ch.cutler-hammer.com/chexpert and type
in a keyword or product for your particular technical
problem in the search box.
11.0 WARRANTY AND LIABILITY
INFORMATION
This instruction booklet is published solely for information
purposes and should not be considered all-inclusive. If
further information is required, you should consult Cutler-
Hammer. Sale of the product shown in this literature is
subject to terms and conditions outlined in appropriate
Cutler-Hammer selling policies or other contractual
agreements between the parties. This literature is not
intended to and does not enlarge or add to any such
contract. The sole source governing the rights and
remedies of any purchaser of this equipment is the
contract between the purchaser and Cutler-Hammer.
NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING
WARRANTIES OF FITNESS FOR A PARTICULAR PUR-
POSE OR MERCHANTABILITY, OR WARRANTIES ARIS-
ING FROM COURSE OF DEALING OR USAGE OF TRADE,
ARE MADE REGARDING THE INFORMATION, RECOM-
MENDATIONS AND DESCRIPTIONS CONTAINED HEREIN.
In no event will Eaton be responsible to the purchaser or
user in contract, in tort (including negligence), strict
liability or otherwise for any special, indirect, incidental or
consequential damage or loss whatsoever, including but
not limited to damage or loss of equipment use, plant or
power system, cost of capital, loss of power, additional
expenses in the use of existing power facilities or claims
against the purchaser or user by its customers resulting
from the use of the information, recommendations and
description contained herein.
FIGURE 8 - MOUNTING DIMENSIONS (IN INCHES)