Intelligent Technologies Modbus to QCPort Adapter Manual
January 2006
MN05002002E (C)
For more information visit
www.eatonelectrical.com
Page 71
Register 2308 (holding register area)
Bit
Fault
Fault Name
Type
Fault Description
0-1
Reserved
2 50
0x32
Too Many
Devices
connected to
Channel A
Medium
Too many devices were attached to the channel.
3 51
0x33
Too Many
Devices
connected to
Channel B
Medium
Too many devices were attached to the channel.
4 52
0x34
Duplicate
Device ID
Channel A
Hard
Two or more devices have the same ID.
5 53
0x35
Duplicate
Device ID
Channel B
Hard
Two or more devices have the same ID.
6 54
0x36
Device Failed
to Respond
Channel A
Medium
Request to device went unanswered. A device is
not responding with necessary information.
7 55
0x37
Device Failed
to Respond
Channel B
Medium
Request to Device went unanswered. A device
is not responding with necessary information.
8 56
0x38
Device
Config CRC
Error
Channel A
Medium
Device configuration CRC is bad.
9 57
0x39
Device
Config CRC
Error
Channel B
Medium
Device configuration CRC is bad.
10 58
0x3A
Scan Fail to
respond
Channel A
Medium
Device failed to send data in its scan slot.
11 59
0x3B
Scan Fail to
respond
Channel B
Medium
Device failed to send data in its scan slot.
12 60
0x3C
Configuration
Channel A
Fault
Medium
An non-recoverable error occurred while trying to
obtain configuration regarding a device on
channel A.
Since the configuration is necessary
to run, this is an unrecoverable fault
.
Recommended action, try performing the
appropriate reset service in an attempt to obtain
the correct configuration information.
13 61
0x3D
Configuration
Channel B
Fault
Medium
An non-recoverable error occurred while trying to
obtain configuration regarding a device on
channel B.
Since the configuration is necessary
to run, this is an unrecoverable fault
.
Recommended action, try performing the
appropriate reset service in an attempt to obtain
the correct configuration information
14-15
Reserved
