26
MTL GECMA RT
– KVM Firmware Update EN
9.
Appendix
9.1
Special features when switching from VGA- to DVI-signal.
As mentioned, during the update process we recommend the connection via DVI-signal to the
transmitting unit. In case of an existing VGA connection you need to switch the video mode from VGA
to DVI within the KVM menu.
Following the review:
9.1.1
Previous versions 1242 – 127x
Call up the firmware menu by pressing the "Scroll lock" button five times:
Figure 32
Figure 33
In the example the video mode is set to DVI
no change required - exit with
Q
key .
Otherwise set to "Auto" or "DVI" by repeatedly pressing the
M
key. Then save with the
S
key and exit.
Pressing
V
key
Содержание Crouse-hinds series
Страница 1: ...Instruction manual MTL HMI and visualisation GECMA WS KVM Firmware Update EN Rev 4 Update...
Страница 29: ......
