MTL GECMA RT
– KVM Firmware Update EN
15
The
Autoupdate Settings
menu will now be displayed. You need to verify if a firmware is stored
(saved) into the flash memory. Only this stored version can be sent out via the automatic update
function.
If
‘none’
is shown
as the
saved firmware
then you need to
perform the following steps.
If there is a firmware saved under
Console module has saved
then proceed to
Step 7
.
Figure 13
You need to save the firmware into the flash memory with the Bitmap Update procedure (
Direct
Update
)
– see section 5 for detailed instruction how to open the bitmap.
Now you need to use the
Network Update
to save the bitmap firmware file into the memory of the
current device. Return to Update Menu by pressing
Esc
key.
Figure 14
Step 4:
Press the
N
key. The Network Overview menu appears:
Содержание Crouse-hinds series
Страница 1: ...Instruction manual MTL HMI and visualisation GECMA WS KVM Firmware Update EN Rev 4 Update...
Страница 29: ......
