![background image](http://html1.mh-extra.com/html/eaton/crouse-hinds-ghg-515/crouse-hinds-ghg-515_operating-instructions-manual_524339020.webp)
Cooper Crouse-Hinds GmbH
Cooper Crouse-Hinds GmbH
Cooper Crouse-Hinds GmbH
Cooper Crouse-Hinds GmbH
Cooper Crouse-Hinds GmbH
Neuer Weg Nord 49
D 69412 Eberbach / Germany
Phone: +49 (0) 6271/806-500
Fax:
+49 (0) 6271/806-476
Internet: www.CEAG.de
E-Mail: [email protected]
GHG 510 7004 P0004 E/(a)/ Auflage 10.09/
5
Use/Properties
The GHG 515 plugs and sockets are used for
the power supply of local controls with varying
locations, as well as of electrical installations,
mobile machinery and driving gear in
hazardous areas.
The plugs and sockets can also be used in a
„normal industrial area“.
The low-voltage plugs and sockets GHG 515
are fitted with a load break switch and can be
used up to max. 125 A (see technical data).
The plug can only be inserted or
withdrawn when no voltage is applied.
The socket can only be switched on if the
plug is fully inserted.
In order to guarantee the type of protection
stated on the type label, also when the plug
has been inserted, the bayonet ring of the
plug, has to be turned until it reaches the
stop on the socket.
To switch off and withdraw the plug, proceed
in the reverse order.
After separating the plug from the socket, the
latter shall be closed with the hinged cover
and secured with the bayonet ring.
6
Conduit instructions
To maintain the environmental rating of
the enclosure:
The existing bottom conduit entry holes must
be closed with the included hubs along with a
1/2" or 3/4" NPT plug (not included).
Note: The threads in the bottom of the
enclosure are metric M40x1.5 / 1/2" NPT
Check for secure and tight fit of the KO
plugs.
7
Grounding instructions
If a metallic conduit system is used to
pro-vide the equipment ground to the
wall socket:
Secure the provided green and yellow
"pigtail" to the ground screw on internal earth
plate.
Then secure the opposite end to a ground
terminal block inside the box. The pigtail
completes the grounding path to the wall
socket terminal.
If a seperate equipment grounding
conductor in the conduit is useed:
The grounding conductor must be connected
to the ground terminal block inside the
enclosure.
If a METAL closure plug is used to close
an unused conduit hole:
A METAL closure plug MUST be
grounded (bonded) back to the ground
terminal block.
NOTE:
Only one conductor per terminal.
Annex to operating instructions
Plug and socket system 100 A, GHG 515
&=7HQWRQiYRGNSRXåLWtVLPåHWHY\åiGDW
YHVYpPPDWH
Ĝ
VNpPMD]\FHXS
Ĝ
tVOXãQpKR
]DVWRXSHQtVSROH
þ
QRVWL&RRSHU&URXVH
+LQGV&($*YHYDãt]HPL
'.0RQWDJHYHMOHGQLQJHQNDQRYHUV WWHVWLO
DQGUH(8VSURJRJUHNYLUHUHVKRV'HUHV
&RRSHU&URXVH+LQGV&($*OHYHUDQG¡U
((QFDVRQHFHVDULRSRGUiVROLFLWDUGHVX
UHSUHVHQWDQWH&RRSHU&URXVH+LQGV&($*
HVWDVLQVWUXFFLRQHVGHVHUYLFLRHQRWURLGLRPD
GHOD8QLRQ(XURSHD
(676HGDNDVXWXVMXKHQGLWRPDULLJLNHHOHV
Y}LWHNVLGDRPDULLJLVDVXYDVWDVMDRPDVHVW
&RRSHU&URXVH+LQGVL&($*HVLQGXVHVW
),17DUYLWWDHVVDWlPlQNl\WW|RKMHHQNllQQ|V
RQVDDWDYLVVDWRLVHOOD(8QNLHOHOOl7HLGlQ
&RRSHU&URXVH+LQGV&($*HGXVWDMDOWDQQH
*5
ǼĮȞ
ȤȡİȚĮıșİȚ
İIJĮ
ȡĮıȘ
IJȦȞ
ȠįȘȖȚȦȞ
ȤȡȘıİ
ȦȢ
ıİ
ĮȜȜȘ
ȖȜȦııĮ
IJȘȢ
ǼǼ
ʌȠȡİȚ
ȞĮ
ȗȘIJȘșİȚ
ĮʌȠ
IJȠȞ
ǹȞIJȚʌȡȠıȦʌȠ
IJȘȢ
&RRSHU&URXVH
+LQGV&($*
³
+$NH]HOpVL~WPXWDWyWD]DGRWWRUV]iJ
Q\HOYpQD&RRSHU&URXVH+LQGV&($*FpJ
KHO\LNpSYLVHOHWpQLJpQ\HOKHWLPHJ
,6HGHVLGHUDWHODWUDGX]LRQHGHOPDQXDOH
RSHUDWLYRLQXQDOWUDOLQJXDGHOOD&RPXQLWj
(XURSHDSRWHWHULFKLHGHUODDOYRVWUR
UDSSUHVHQWDQWH&RRSHU&URXVH+LQGV&($*
/7âLRVQDXGRMLPRLQVWUXNFLMRVLãYHUVWRV
Ƴ
-
nj
V
ǐ
JLPW
ą
M
ą
NDOE
ą
JDOLWHSDUHLNDODXWLDWVDNLQJRMH
&RRSHU&URXVH+LQGV&($*DWVWRY\EHMHVDYR
ãDO\MH
/9âRHNVSOXDW
Ɨ
FLMDVLQVWUXNFLMXYDOVWVYDORG
Ɨ
YDUDWSLHSUDV
Ư
WMXVXYDOVWVDWELOG
Ư
JDM
Ɨ
&RRSHU
&URXVH+LQGV&($*S
Ɨ
UVW
Ɨ
YQLHF
Ư
E
Ɨ
0-LVWJ
ƫ
XMLWROEXGDQLOPDQZDOILOOLQJZD
QD]]MRQDOLWDJ
ƫ
KRPPLQJ
ƫ
DQGLUUDSSUH
Ī
HQWDQW
WD&RRSHU&URXVH+LQGV&($*ISDMML
Ī
KRP
1/,QGLHQQRRG]DNHOLMNNDQGHYHUWDOLQJYDQ
GH]HJHEUXLNVLQVWUXFWLHLQHHQDQGHUH(8WDDO
ZRUGHQRSJHYUDDJGELM8Z&RRSHU&URXVH
+LQGV&($*YHUWHJHQZRRUGLJLQJ
36HIRUQHFHVViULDDWUDGXomRGHVWDV
LQVWUXo}HVGHRSHUDomRSDUDRXWURLGLRPDGD
8QLmR(XURSHLDSRGHVROLFLWDODMXQWRGRVHX
UHSUHVHQWDQWH&RRSHU&URXVH+LQGV&($*
3/1LQLHMV]
ą
LQVWUXNFMrREV
á
XJLZRGSRZLHGQLHM
ZHUVMLM
Ċ
]\NRZHMPR
Ī
QD]DPyZL
ü
Z
SU]HGVWDZLFLHOVWZLHILUP\&RRSHU&URXVH
+LQGV&($*QDGDQ\NUDM
6(Q|YHUVlWWQLQJDYGHQQDPRQWDJHRFK
VN|WVHOLQVWUXNWLRQWLOODQQDW(8VSUnNNDQYLG
EHKRYEHVWlOODVIUnQ(U&RRSHU&URXVH
+LQGV&($*UHSUHVHQWDQW
6.7HQWRQiYRGQDREVOXKX9iPYR9DãRP
URGQRPMD]\NXSRVN\WQH]DVW~SHQLHVSROR
þ
QRVWL
&RRSHU&URXVH+LQGV&($*YR9DãHMNUDMLQH
6/21DYRGLOD]DXSRUDERY9DãHPMH]LNX
ODKNR]DKWHYDWHSULSULVWRMQHP]DVWRSQLãWYX
SRGMHWMD&RRSHU&URXVH+LQGV&($*Y9DãL
GUåDYL
The data as per point 3 and 4 will have to
be taken into account with the use.
Applications other than described are not
permitted without COOPER CROUSE-
HINDS / CEAG’s prior written consent.