Installation procedure
36
CBC-8000 capacitor bank control installation and operation instructions
MN916001EN—October 2018
Eaton.com
10. Use a cable tie to secure the two cables that are
connected to the SelectComm module as shown in
Figure 41.
11. Apply power to the control to verify that the radio
modem powers up.
12. The radio modem must be configured to communicate
with the control using the setup procedure that was
provided by the radio modem manufacturer.
13. When the work is completed, place the control in
Remote or Automatic mode by pressing the
REMOTE
or
AUTO
button.
14. Close the door of the control.
15. Secure the latches.
Figure 41. CBC-8000 with radio modem installed.
Secure Cable Point
Antenna Cable
Radio Modem Power Cable
SelectComm Module
Radio Modem
Document Holder
Communication Cable
Antenna
Cable Tie Down Points
Содержание COOPER POWER SERIES
Страница 49: ......