Eaton Cooper Lighting Galleon, Руководство по установке

Страница: 15 / 22

3 2 EATON
IB500004EN Installation instructions
EATON
IB500004EN Installation instructions
Installation Instructions - Galleon Quick Connect Arm Installation Instructions - Galleon Quick Connect Arm
INSTALLATION
ote: N Care must be taken not to set lighting fixture down
on optical lenses or lift the fixture in the lens area.
Tools Required
Ratchet, a shallow 3/4” socket and 1/4 hex nut driver; 3/8”
Allen drive for 1/2” inch bolt; #2 Phillips head screw driver;
torque wrench
Factory Installed Housing Side Arm - Option
(Figure 1. – Figure 5.)
1. Pole mounting arm is designed for a square or round
pole. Round pole installation will require the mounting
arm break away tabs to be removed. Grab break away
tab with pliers and break-away the tabs. (Figure 1.)
2. Mount the arm to the round or square pole using the
provided 1/2” x 1-3/4” long bolts and nuts. Torque bolts
to 40 foot-lbs. (55 N-M). (Figure 2.)
3. Fold fixture wires tightly towards the mounting arm
as sliding fixture’s house side arm onto pole mounting
arm. Now tighten the center Philips head screw to 20
in-lbs. (2.3 N-M). Now fixture’s house side arm and pole
mounting arm are connected. (Figure 3.)
4. Make wire connections inside the mounting arm. Refer
to wire diagram for power connections. Connect the
supply wires to appropriate luminaire leads. (Figure 4.)
● ●
Supply side ground wire to green luminaire lead.
● ●
Supply side neutral wire to white luminaire lead.
● ●
Supply side line voltage wire to black luminaire lead.
5. Install arm cover and tighten Philips head screws to 20
in-lbs. (2.3 N-M).
ote: N Ensure the luminaire supply leads do not get pinched
between cover and mounting arm. (Figure 5.)
6. Install pole cap after completion of luminaire installation
and wiring.
Field Installed Housing Side Arm - Accessory
(Figure 1. – Figure 7.)
1. Pole mounting arm is designed for a square or round
pole. Round pole installation will require the mounting
arm break away tabs to be removed. Grab break away
tab with pliers and break-away the tabs. (Figure 1.)
2. Mount the arm to the round or square pole using the
provided 1/2” x 1-3/4” long bolts, washers and nuts.
Torque bolts to 40 foot-lbs. (55 N-M). (Figure 2.)
3. Mount the housing side arm to the back of the fixture’s
body using provided 1/2” x 1-3/4” long bolts, washers
and nuts. Torque bolts to 40 foot-lbs. (55 N-M). Bolt is
inserted from inside of the fixture body. Pull the wires
out of center hole and towards house side arm.
(Figure 3.)
4. Install arm cover and tighten Philips head screws to 20
in-lbs. (2.3N-M).
ote: N Ensure the luminaire supply leads do not get pinched
between cover and mounting arm. (Figure 4.)
Figure 1.
Figure 1.
Figure 2.
Figure 3.
Figure 2.
Figure 3.
Figure 4.
Figure 5.
Line (Black)
Black
White (Black 480V)
Green Ground
Fixture
White Common
(Black 480V)
Green Ground
Pole Mounting Arm
For Round Pole
Installations, Break
Off Tabs
For Round Pole
Installations, Break
Off Tabs
Pole Mounting Arm
House Sided Arm
Lock Washer
Washer
1/2” Nut
Washer
1/2” Bolt
Center Hole
For Wires
Pole Mounting Arm
For Round Pole
Installations,
Break Off Tabs
Figure 4.