![background image](http://html1.mh-extra.com/html/eaton/connectups-web-snmp-card/connectups-web-snmp-card_quick-start-instructions_524560010.webp)
Eaton ConnectUPS Web/SNMP Card Quick Start Instructions 164950185—Rev D 10
Figure 5. Selecting the COM Port
9.
Click
Configure
. The COM Properties dialog displays.
10. In the COM Properties dialog, click
Restore Defaults
to set the correct baud
rate, data bits, stop bit, and flow control.
11. Click
OK
.
12. At the blinking screen, press
Enter.
You should be prompted to enter the
password (default is
admin
).
NOTE
If the Password prompt does not appear, press
Enter
again. If it
still does not appear, check the following conditions:
l
Verify the serial line is set to 9600 baud, no parity, 8 data bits, 1 stop bit,
and no flow control.
l
If the serial line settings are correct, check the cabling to verify all
connections are secure.
l
Verify that your terminal program is set to the correct communication port
for the serial connection.
l
Verify that the card has power (one or more LEDs on the card are
illuminated). The UPS should be turned on.
Содержание ConnectUPS Web/SNMP Card
Страница 24: ...Eaton ConnectUPS Web SNMP Card Quick Start Instructions 164950185 Rev D 24 Figure 16 Example Completion E mail ...
Страница 25: ......
Страница 26: ...164950239 164940185 D ...