Form ML-318
Revised September 3, 1997
EATON PRODUCT WARRANTY
Subject to the conditions stated herein, Eaton
Corporation warrants to the Purchaser that
each new Airflex Product manufactured by
Eaton will be free from failures caused by
defects in material and workmanship, and will
deliver its rated capacity, for a period of twelve
(12) months from the date of shipment to Pur-
chaser, provided such Product is properly
installed, properly maintained, operated under
normal conditions and with competent supervi-
sion. Warranty claims shall, be made in writing
and the part or parts shall, if requested by Air-
flex Division, be returned repaid to the Airflex
Division for inspection.Upon a determination
that a defect exists, Eaton shall thereupon cor-
rect any defect, at its option either by repairing
any defective part or parts or by making avail-
able at Eaton’s plant a repaired or replacement
part. This warranty does not extend to normal
wear parts or components of the Product, such
as friction material and friction surfaces.
LIMITATION OF WARRANTY
THE FOREGOING WARRANTY IS EXCLUSIVE
AND IN LIEU OF ALL OTHER WARRANTIES
WHETHER WRITTEN, ORAL OR IMPLIED. ANY
IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE
ARE SPECIFICALLY EXCLUDED.
In no event shall Eaton be liable for special,
incidental or consequential damages. Eaton’s
liability arising out of the supplying of such
Product, or its use, whether in warranty, con-
tract or otherwise, shall in no case exceed the
cost of correcting defects in the Products as
herein provided. Upon expiration of the twelve
(12) month period, all such liability shall termi-
nate.
THE FOREGOING SHALL CONSTITUTE
THE SOLE REMEDY OF PURCHASER AND THE
SOLE LIABILITY OF EATON
.
Eaton Corporation
Airfiex Division
9919 Clinton Road
Cleveland, Ohio 44144
KAIZEN SYSTEMS INTL LLC
DISTRIBUTOR
WWW.AIRCLUTCH-KAIZEN.COM
