![background image](http://html1.mh-extra.com/html/eaton/9phd/9phd_user-and-installation-manual_3844014035.webp)
Figure 7. EBC-G cable entry holes 2
These through-holes are meant for installing several battery cabinets side by
side.
• Install the UPS and the first battery cabinet next to it on the right side of the
UPS.
• Install the second battery cabinet on the right side of the first battery cabinet
and use the wire ways shown in the figures above in the first EBC to lead to
the second EBC wiring and then to the UPS.
Note: If you choose to run the wiring through the side panels of the UPS and
battery cabinet, the battery cabinet must be located on the right side of the
UPS.
Eaton 9PHD Accessory Cabinets TFC-A, EBC-F
and EBC-G
User's and installation guide
©
Eaton Corporation plc 2022. All rights reserved.
Document ID: P-164000538
35 (63)