WARNING
To prevent tipping the cabinet, turn all four jacking bolts evenly and
consecutively.
13. Remove the bolts that attach
the wooden beams to the
supports.
14. Pull the wooden beams out from
under the battery cabinet.
Discard or recycle them in a
responsible manner.
WARNING
Do not loosen or remove any other supports yet. Lower the cabinet by the
jacking bolts before you remove the supports.
15. Carefully and evenly lower the
cabinet by turning each jacking
bolt consecutively two full turns.
Continue until the casters touch
the floor and the cabinet is no
longer supported by the jacking
bolts.
Eaton 9PHD Accessory Cabinets TFC-A, EBC-F
and EBC-G
User's and installation guide
©
Eaton Corporation plc 2022. All rights reserved.
Document ID: P-164000538
29 (63)