614-40099-00
17
Led indicator
The following table shows the indicator status and description :
Indicator
Status
Description
Green
On
The UPS is "On" and the load is protected
Yellow
On
The UPS is on battery mode
Flashing
The battery voltage is below the warning level
Red
On
The UPS has an active alarm or fault. See troubleshooting page for additional
information.
Led bar
Static blue
The UPS is "On" and the load is protected
Flashing blue
UPS is on battery or the Battery service age warning (LCM) is reached.
Static red
The UPS has an active alarm or fault.
Flashing red
The UPS output has stopped due to a fault such as "fan blocked" or "over
temperature".
4.2 LCD description
①
Load status and measure
②
Equipment status icon
③
Status / Message
④
Battery status
As default, or after 5 minutes of inactivity, the LCD displays the screen saver.
The backlight LCD automatically dims after 5 minutes of inactivity. Press any button to restore the screen.
Note. If other indicator appears, see troubleshooting page for additional information.
The following table describes the status information provided by the UPS :
Operation status
Possible cause
Action
Standby mode
The UPS is OFF, waiting for start-up
command from user
Equipment is not power until button is
pressed
during start up and the green "normal mode" LED
indicator is illuminated.
Normal mode
The UPS is operating normally.
The UPS is powering and protecting the equipment.
