UPS 40-160 kVA, 400 V 50/60 Hz output
User’s and Installation Guide
1023294
Revision C
52
The printed log entries contain a time and date stamp and the alarm text message.
Terminal mode uses this format for printing alarm entries:
MM
DD
YYYY HH:MM:SS.hh KYWD MESSAGE
**** <CR> <LF>
Where:
Equals:
MM
Month (2 digits)
YYYY
Year (4 digits)
DD
Day (2 digits)
HH
Hour (2 digits)
MM
Minute (2 digits)
SS
Second (2 digits)
hh
Hundredths of Second (2 digits)
KYWD Keyword
(ALARM, NOTICE, COMMAND, or STATUS)
****
System Diagnostic Information
<CR>
Carriage Return Character (ASCII 13)
<LF>
Line Feed (ASCII 10)
An alarm message is prefixed by the word “CLEAR” whenever an alarm is entered into the
Event History Log with a cleared status.
If a port is operating in Terminal mode and is connected to a computer, you can press [Esc] [H]
to print the entire log with a firmware version header.
Here is a sample Event History Log printout:
03/11/2004 14:13:12.954 NOTICE: Battery Voltage Low
