background image

I.B. 3A74499B

Cutler-Hammer

Five Parkway Center
Pittsburgh, PA  15220

Effective 11/97 (ISI)
Style 3A74499B
Printed in U.S.A.

This instruction booklet is published solely for informa-
tion purposes and should not be considered all inclu-
sive. If further information is required, you should con-
sult Cutler-Hammer.

Sale of product shown in this literature is subject to
terms and conditions outlined in appropriate Cutler-
Hammer selling policies or other contractual agreement
between the parties. This literature is not intended to
and does not enlarge or add to any such contract. The
sole source governing the rights and remedies of any
purchaser of this equipment is the contract between the
purchaser and Cutler-Hammer.

NO WARRANTIES, EXPRESSED OR IMPLIED,
INCLUDING WARRANTIES OF FITNESS FOR A PAR-
TICULAR PURPOSE OR MERCHANTABILITY, OR
WARRANTIES ARISING FROM COURSE OF DEAL-
ING OR USAGE OF TRADE, ARE MADE REGARDING
THE INFORMATION, RECOMMENDATIONS AND
DESCRIPTIONS CONTAINED HEREIN. In no event
will Cutler-Hammer be responsible to the purchaser or
user in contract, in tort (including negligence), strict lia-
bility or otherwise for any special, indirect, incidental or
consequential damage or loss whatsoever, including but
not limited to damage or loss of use of equipment, plant
or power system, cost of capital, loss of power, addition-
al expenses in the use of existing power facilities, or
claims against the purchaser or user by its customers
resulting from the use of the information, recommenda-
tions and description contained herein.

Содержание 36W-VAC25

















































Отзывы: