manualshive.com logo in svg

EasyStand Glider Medium, Руководство пользователя, Страница: 19 / 28

Поделиться
Скачать
EasyStand Glider Medium Скачать руководство пользователя страница 19

A

B

C

D

E

A

Standard

Actuator 

Left Handle

PNG50126

B

Standard

Actuator 

Right Handle

PNG50059

C

Adjustable/

Removable Handle

Universal Left/Right

PNG50328

D

T-Style

Handle 

Extension

PNG50070

Remove the nuts and bolts from the pump handle. Insert the handle onto the 

pump. Line up holes and insert bolts, place nuts onto bolts. Tighten securely.

E

Quad Grip

Handle

Extension

PNG50044

Page 7 - Option Assembly

Adjusting - Page 16

FIG. 13

FIG. 14

Seat Depth/Back Angle

Caution: These adjustments are only to be made while the unit is in 

the seated position.

FIG . 13-

 

Loosen the knob on the seat tube located under the seat. Do 

not unscrew seat depth knob all the way when adjusting the seat. 

Depress the spring button and position the back so that the hip pivot 

is located as close as possible to the user’s hips. Tighten the seat 

depth knob securely.  

Note: Adjust back angle after each seat depth position change.

FIG . 14- To adjust the back angle, use the knob located on the 

following arm. Before standing, the back angle must be set so the 

indicator on the side of the unit is in the green.

FIG . 15- The back/seat angle locator is located on the side of the unit. 

When the unit is in the seated position, the green area indicates the 

back angle. Before standing, the indicator must be in the green. 

Caution: Before standing, the seat/back angle indicator must be in the 

green. Failure to set the back angle in green prior to standing could 

cause the unit to lock in a standing position, causing damage to your 

unit.

Tray/Front Pad

FIG . 16-

 

To adjust the height of the tray/front pad, loosen the clamp 

located just above the front column. Lift the tray to the user’s desired 

height level and tighten the clamp. 

To adjust the depth of the tray/front pad, loosen the clamp located 

just below the tray. Move the front pad to the user’s desired position 

and tighten the clamp.

 

Caution: While lowering the tray height, keep hands clear of the area 

underneath the tray.

 

!

FIG. 15

FIG. 16

!

Green Area

!

Adjusting Your Glider

®

Содержание Glider Medium





























Отзывы:

Нет отзывов