easyRAID NAS easyRAID FN-420GT, Руководство по эксплуатации

Страница: 75 / 128

-74- easyRAID NAS FN-420GT Operation Manual
1. Add Group
To add a new group in the system, click “Add” in the Groups Settings. This mode
allows the set up of users at the local level. Adding groups from a server requires the
users to be set up on the server first and access & authentication via Domain level in
the “Network Setup” menu section. Figure 3-68 shows the contents of the Add Group
screen.
Figure 3-68 Add Group Screen
(1) Member/Non member: When a new group is added, click direction key to add
its member(s) from the list on the right side of screen or
to remove. To change members of a group, a member(s)
can be deleted by using the direction key. This function
is only enabled at the local user level. Domain level
users must be added or remove at the server level.
(2) Group ID: When a new group is created, the system assigns it a
unique ID. In general, there is no need for the system
administrator to change that.