14
INSTALLATION GUIDE
15
INSTALLATION GUIDE
U S A
U S A
➢
Auxiliary Harness (CN9)
CN9/1
YELLOW
(-250mA) AUX 1 OUTPUT
This wire provides (-) 250mA programmable output whenever the transmitter
button(s) controlling Aux 1 is pressed.
• For two switch vehicles: Please connect it with folding Switch wire as below
CN9/2
YELLOW/BLACK
(-250mA) AUX 2 OUTPUT
This wire provides (-) 250mA programmable output whenever the transmitter
button(s) controlling Aux 2 is pressed.
CN9/3
VIOLET
(-250mA) STARTER KILL
This wire supplies a (-) 250mA ground as long as the system is armed.
CN9/4
BLANK N/A
CN9/5
GREY/BLACK
(-250mA) AUTO LIGHT CONTROL OUTPUT
Utilize this option to stop the auto light function in remote start, reservation start,
and turbo start modes.
Autolight control
(gray/black)
Door trigger pin in
driver seat
➢
LF Module - Smart Door (CN10)
Mount the LF module on the front windshield (if the LF module is mounted under
the dash, it decreases the transmitting
distance). When the Smart Remote is
within the communication range (6 - 8 feet)
of the LF module, it will unlock the vehicle.
When the Smart Remote is not detected in
the communication range (6 - 8 feet),
the vehicle will lock within 12~15 seconds.
Note
The Smart Door function mode can be activated from the remote. Simply hold the
unlock button for 3 seconds to activate the Smart Door mode.
Содержание E8-B
Страница 1: ...INSTALLATION GUIDE U S A EP400 E8 B www Easycar USA com www Easycar USA com ...
Страница 2: ......
Страница 13: ......