Easycar E8-B, Руководство по установке

Страница: 7 / 13

12
INSTALLATION GUIDE
13
INSTALLATION GUIDE
U S A U S A
➢

Easy Door Lock Sensor, LED Light Connector (CN5)
Easy Door Lock Sensor
Doors can be locked (armed) or unlocked (disarmed) without the remote or car keys
with this function. Simply input the 4 digit pass-code by knocking on the Easy Door
Lock Sensor on the front windshield.
** On the pager model (E8-B), knocking twice on the sensor will send a call signal to
the pager remote. However, it will not operate when the vehicle is on the ON position
nor when the engine is running.
LED Light
The 10 digit blue LED displays various functions such as arming, disarming, valet
mode and emergency status (panic, shock, and theft).
➢
Dual Shock Sensor (CN6)
Install the sensor in a central loca-
tion and adjust its sensitivity after
opening the door in accordance
with different shocks and status of
LEDs on the shock sensor. It sens-
es shocks by two steps (strong and
weak shock).
➢

Antenna Module (CN7)
Mount the antenna horizontally at the top left or right corner of the front windshield.
The transmitting distance may decrease if the vehicle has a UV protective coating
on the windshield.
➢

Start Button (CN8)
1. Push button ON/OFF
<Ignition Off> <Ignition On>
1-1) Engine ON
To start your vehicle, press the
brake and press the Push-to-Start
button. The “STOP” will illuminate
to red.
O n c e t h e p a r k i n g b r a k e
(automatic transmission) or the
emergency brake (manual
transmission) is released, the
red illumination will disappear. Once the red "STOP" illumination disappears,
you will not be able to stop the engine.
1-2) Engine OFF
To turn your engine off, press the brake and press the Push-to-Start button.
Once the parking brake (automatic transmission) or the emergency brake
(manual transmission) is engaged, the green illumination will appear on
“START”.
2. OFF

ACC

ON

OFF
<ON>
<ACC>
2-1) ACC
To enable the vehicle in the ACC mode,
press the Push-to-Start button once
without pressing on the brake
2-2) ON
To enable the vehicle in the Ignition ON
mode, press the Push-to-Start button
twice without pressing on the brake.