Easycar E8-B, Руководство по установке

Страница: 11 / 13

20
INSTALLATION GUIDE
21
INSTALLATION GUIDE
U S A U S A
6. How to Program the Options
A. To Program
1) Review the options above and remember the button sequence required for
that specific option.
2) Press the I + IV ( + ) button simultaneously for 2 seconds to begin the
programming mode. The vehicle’s parking lights will flash once and chirp
once, stating that it is now in programming mode.
3) Immediately press the two corresponding buttons (one after another).
i.e.) Sound Select option

press I ( ), then IV ( ).
4) Within 3 seconds, the vehicle’s parking lights will flash as well as chirp;
corresponding to the first button pressed followed by chirp(s) and flashes
matching the second button pressed.
i.e.) Sound Select option

vehicle chirps once with one flash (since the I ( )
button was pressed), followed by 4 chirps and 4 flashes (since the IV button
was pressed).
5) To end programming mode, press I + IV ( + ) for 2 seconds. It will also
end programming with 30 seconds of inactivity. The vehicle’s parking lights will
flash once and chirp once, stating that it is now out of the programming mode.
B. Incorrect Programming
Vehicle will chirp once to warn you that the programming was not properly
programmed.
Please begin the programming once again.
C. Factory Setting Reset
1) Press the I + IV ( + ) button simultaneously for 2 seconds to begin the
programming mode. The vehicle’s parking lights will flash once and chirp once,
stating that it is now in programming mode.
2) Immediately press IV ( ) twice. Within 3 seconds, the vehicle’s parking lights
will flash as well as chirp four times, followed by four chirps and flashes.
3) To end programming mode, press I + IV ( + ) for 2 seconds. It will also end
programming with 30 seconds of inactivity. The vehicle’s parking lights will flash
once and chirp once, stating that it is now out of the programming mode.
Tech Support available on Monday thru Saturday, 9am ~ 5pm (PST)
(562) 841-4968