REMOTE OPERATION
25
1
IP Address / Port / User Name / Password
Check if the network connection information of the DVR within which
contains the video data you need is correct.
2
HDD Number / Channel
Specify the hard disk (HDD Number) and channel number (Channel)
within which have the video data you need.
3
Download by Time
Specify the time range within which has the video data you want in the
“Start Time” and “End Time” columns.
4
Download by Event
Select an event log from the event list. This list shows all logs in the
specified DVR from the latest to the earliest.
‧
To quickly find the events you need, check or uncheck the event type
“System” / “Manual” / “Alarm” / “Motion”, and select the log you want.
‧
To view the earlier or later logs that are not shown in the current page,
click “Prev. Page” or “Next Page”.
‧
To refresh the event list, click “Reload”.
5
File Path
Assign the location where the backup files are saved.
6
Simultaneous Playback
To view the backup images simultaneously when the download process
is in progress, select the checkbox “Simultaneous Playback”. You will
see the backup images while the images are being downloaded to the
PC or notebook.
To simply backup images without previewing, deselect the checkbox
“Simultaneous Playback”. You will only see a message box indicating
the total time needed, the current status and the saving location.
7
Download / Cancel
Click “Download” to start or “Cancel” to discard the video backup.
R
R
e
e
c
c
o
o
r
r
d
d
S
S
e
e
t
t
t
t
i
i
n
n
g
g
Press “
” to go into the “Record Setting” page, and you can set the following items:
‧
Record type
‧
Hard disk overwriting
‧
Pre- / post-alarm record time
‧
Record time setting
‧
Record path
Record type
In this section, you can select which type of the recording will be enabled. There are 4 options: Manual /
Schedule / Motion / Alarm.
Hard disk overwriting
To overwrite the recorded data from the earliest to the latest when the hard disk is full, check “Hard Disk
Overwrite” checkbox.
