2
Eastwood Technical Assistance: 800.544.5118 >> [email protected]
SPEcIFIcATIONS
TIG Welding is the most controllable, efficient and most versatile method of welding many metals including steel, stainless steel,
aluminum and more. Your
Eastwood TIG200 Welder
with High-Frequency Inverter Technology is capable of welding thin or heavy gauge
steel and aluminum with precision and ease. The Voltage self-sensing circuitry automatically detects a power source range of 110 to 240
Volts and delivers from 10 up to 200 Amps of AC or DC current at super-high frequency with the added advantage of a light weight unit.
The included foot pedal provides the operator with the precise Amperage control required when welding. A high frequency start feature
guarantees an instant arc strike with no tungsten contamination.
STATEMENT OF LIMITED WARRANTY
The Eastwood Company (hereinafter “Eastwood”) warrants to the end user (purchaser) of all new welding and cutting equipment (collectively called the “products”) that it will
be free of defects in workmanship and material. This warranty is void if the equipment has been subjected to improper installation, improper care or abnormal operations.
WARRANTY PERIOD:
All warranty periods begin on the date of purchase from Eastwood. Warranty Periods are listed below, along with the products covered during those warranty periods:
3 Year Warranty on Material, Workmanship, and Defects:
• Eastwood TIG 200 Welder
Items not covered under this warranty: Collets, collet bodies, tungsten, nozzles, and ground clamp and cable.
All other components are covered by the warranty and will be repaired or replaced at the discretion of Eastwood.
2 Years:
• All Welding Helmets.
CONDITIONS OF WARRANTY TO OBTAIN WARRANTY COVERAGE:
Purchaser must first contact Eastwood at 1-800-345-1178 for an RMA# before Eastwood will accept any welder returns.
Final determination of warranty on welding and cutting equipment will be made by Eastwood.
WARRANTY REPAIR:
If Eastwood confirms the existence of a defect covered under this warranty plan, Eastwood will determine whether repair or replacement is the most suitable option
to rectify the defect. At Eastwood’s request, the purchaser must return, to Eastwood, any products claimed defective under Eastwood’s warranty.
FREIGHT COSTS:
The purchaser is responsible for shipment to and from Eastwood.
WARRANTY LIMITATIONS:
EASTWOOD WILL NOT ACCEPT RESPONSIBILITY OR LIABILITY FOR REPAIRS UNLESS MADE BY EASTWOOD. EASTWOOD’S LIABILITY UNDER THIS WARRANTY SHALL NOT
EXCEED THE COST OF CORRECTING THE DEFECT OF THE EASTWOOD PRODUCT. EASTWOOD WILL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES (SUCH
AS LOSS OF BUSINESS, ETC.) CAUSED BY THE DEFECT OR THE TIME INVOLVED TO CORRECT THE DEFECT. THIS WRITTEN WARRANTY IS THE ONLY EXPRESS WARRANTY
PROVIDED BY EASTWOOD WITH RESPECT TO ITS PRODUCTS. WARRANTIES IMPLIED BY LAW SUCH AS THE WARRANTY OF MERCHANTABILITY ARE LIMITED TO THE
DURATION OF THIS LIMITED WARRANTY FOR THE EQUIPMENT INVOLVED. THIS WARRANTY GIVES THE PURCHASER SPECIFIC LEGAL RIGHTS.
THE PURCHASER MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
Output
Amperage
Range
10-200 A
AC/DC
Maximum
Output No Load
Voltage
51 V DC
Input
Voltage
120 VAC
50-60 Hz
220 VAC
50-60 Hz
Rated
Duty
Cycle
45%
@ 150 A
Pre
Gas
Flow
0.1-1.0 Sec
Post
Gas
Flow
2-8 Sec
Weight
45 Lbs.
Overall
Dimensions
19.1”
(486 mm) x
9.8”
(248 mm) x
20.0”
(508 mm)
DuTY cYcLE
The Rated Duty Cycle refers to the amount of welding that can be done within an amount of time. The Eastwood TIG200 has a duty
cycle of 45% at 150 Amps. It is easiest to look at your welding time in blocks of 10 Minutes and the Duty Cycle being a percentage
of that 10 Minutes. If welding at 150 Amps with a 45% Duty Cycle, within a 10 Minute block of time you can weld for 4.5 Minutes
with 5.5 Minutes of cooling for the welder. To increase the Duty Cycle you can turn down the Amperage Output control. Going above
150 Amps will yield a lower duty cycle.
