Eastwood flux core 90, Инструкции по сборке и эксплуатации

Страница: 19 / 21

To order parts and supplies: 800.345.1178 >> eastwood.com
19
small amount in one area and then move to another to spread out
the hear in the piece.
Poor
Fusion
Low Voltage Adjust Voltage Output to high setting.
Slow Wire
Speed Adjust Wire Speed to higher setting.
Dirty Base
Metal Remove all paint, rust, oil, grease, dirt, or any other contaminants
that may be on the surface of the piece.
Excessive Wire
Stick Out Move the Contact Tip on the Welding Gun closer to the work piece
to shorten the length of exposed Welding Wire.
Cold Base
Metal
If welding on a large piece, particularly cast pieces, which will
absorb a lot of heat, it may be necessary to pre-heat your part with
a torch.