Eastwood flux core 90, Инструкции по сборке и эксплуатации

Страница: 13 / 21

13
Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com
7. Depress the trigger to start the wire feed which starts the arc. NOTE: A push, perpendicular, or
drag technique can be used to weld the pieces together.
8. Once you depress the trigger and the arc has started, you will notice a molten puddle will form;
this puddle is the weld bead and will follow the motion of the Welding Gun. Watching the size of
the puddle dictates how fast you should be moving with the torch. If you burn through the
material
you are either moving to slow or you need to set the machine to “LOW” voltage. If you’re
not penetrating the base metal you’re either moving too fast or you need to set the machine to
“HIGH” voltage.
9. Release the trigger on the Welding Gun to stop the weld.
10. After finished welding, turn off the welder.