Eastwood flux core 90, Инструкции по сборке и эксплуатации

Страница: 11 / 21

To order parts and supplies: 800.345.1178 >> eastwood.com
11
The Eastwood Flux Core 90 can be used with a 4 inch wire spool only. To install the wire spool
follow the procedure listed below:
1. Open the door of the welder and remove the wing nut (FIG. C-C1) and spacer from the
Wire Spool Spindle.
2. Slide the 4 inch Wire Spool onto the Wire Spindle and reinstall the spacer and wing nut.
INSTALLING THE WIRE
SPOOL
FI
G .
C
C1
C2
C3
C4