Preparing the PROCESSOR for Installation
1C7836 – February 1996
17
Measuring the Distance between the SORTER and the Processing TANK
Important
Correct leveling of the PROCESSOR is critical for adjusting the height of the SORTER.
[1] Move the SORTER to the down position.
[2] Adjust the height of the SORTER.
(a) Loosen the JAM NUTS on the SPINDLES.
Note
If necessary, lift the back SPINDLE to allow adjustment of the front SPINDLE.
(b) Adjust the front SPINDLE until the height of the SORTER is 8 cm (3.175 or 3
11
/
64
in.) 1.3mm ( 0.050 or
3
/
64
in.). See the figure.
(c) Observe the figure carefully to check that you are measuring from the correct points.
(d) Adjust the back SPINDLE until it just touches the TANK.
(e) Tighten the JAM NUTS.
8 cm
(3.175 in.)
H127_2033BA
SPINDLE
TANK
JAM NUT
front
TANK
H127_2033BCA
back
