4
When hoisting the Concrete Kibble by a crane, ensure the Crane Lifting Hook is correctly
fitted to the Lifting Bar and is free to slide within the Lifting Eye at the top of the Lifting
Bar when hoisted.
Fig. 3.2 (type CKM10 shown)
If a single fall rope is used to hoist the Concrete Kibble, the hook may spin and create a
dangerous situation. Do not allow the crane hook to rest on or inside the Concrete Kibble.
Keep the Kibble in an upright position at all times.
4)
OPERATIONAL AND SAFETY PROCEDURES
Preliminary Safety Checks
A “Competent Person” shall inspect all components on the Concrete Kibble and Crane to
ensure they are in safe working order. Do not use the Concrete kibble if any of the
components are damaged or not in safe working condition. A “Competent Person” shall
inspect the lifting slings, lifting bar, Gate and Handle mechanisms, Chute and chains daily to
ensure that they are in safe working order.
The Operator shall check that the Concrete Kibble has been correctly fitted in accordance
with these Instructions (refer Section 3), and/or the relevant Crane or Industrial Truck
Operator’s Manual depending on the operation to be carried out.
All signage must be strictly adhered to and checked to ensure that the compliance plate is
not damaged and is legible.
General Operating and Safety Procedures
The use of the Concrete Kibble shall be limited to those situations for which it is specifically
designed and in accordance with AS 2550.1. All lifting equipment used must meet the
relevant Australian Standards including AS 3990.1, AS 3775 and AS 3776.
Lifting Eye
Concrete Kibble
Crane Lifting
Hook
Lifting Point
Lifting Bar