East West Engineering CKM05, Инструкция по эксплуатации

Страница: 10 / 12

10
7) MAINTENANCE
Regular maintenance including Testing, Inspection and Cleaning should be carried out on
the Kibble to reduce the risk of potential hazards arising. In particular, thorough cleaning
after operational use is a must to prevent the Discharge Gate, Handle and/or Chute from
jamming as well as making identification of damage easier. The Kibble should be cleaned
and visually inspected by a “Competent Person” under adequate lighting conditions, before
each shift, to ensure all components are functioning correctly and are free from any
noticeable wear or damage, particularly at any load bearing or highly stressed points. If
components are considered worn or damaged, or if safety charts or labels are damaged or
illegible, the Kibble should be taken out of service and East West Engineering or an
“Authorised Person” contacted for advice. Periodic testing may be required if any damage
is noted, as this could be an indication of abuse or overloading. Keep maintenance records
to ensure safety checks are carried out.
8) COMPLIANCE PLATE INFORMATION
Fig. 8.1
A Product Type
Refer “A”,
Table 8.2
B Year of Manufacture Individually stamped
C Working Load Limit
Refer “C”,
Table 8.2
D Dry Weight of the unit
Refer “D”,
Table 8.2
E Serial Number Individually stamped
F Volume
Refer “F”,
Table 8.2
COMPLIANCE PLATE MARKING
Type
“A” “B” “C” “D” “E” “F”
CKM05 CKM05 YM 1500 275 Serial No 0.50
CKM10 CKM10 YM 3000 320 Serial No 1.00
CKM15 CKM15 YM 4000 415 Serial No 1.50
Table 8.2
“D” “A”
“B”
“C”
“E”
“F”