3
Type Data
To accurately identify the Concrete Kibble and when ordering parts, please quote the
Type
and
Serial Number
. This information can be found on the compliance plate situated on the
Kibble. Please refer
Fig 8.1
and
Table 8.2
, codes “A” and “B” for more information.
WARNING
: These Instructions
MUST be READ in
FULL by the Crane/Forklift Operator
& all Crane
Personnel
and all Operational & Safety Procedures
and Risk Control Measures complied with before the
use of this Attachment.
3)
METHOD OF ATTACHMENT
Forklift attachment procedure
Before handling the Concrete Kibble with a Forklift, ensure that the fork arms are suited to
the attachment and set to a width that ensure stability of the load.
Fig. 3.1 (type CK10 shown)
To ensure the Concrete Kibble stays on the fork tines when elevated, always back tilt the
Forklift mast. Before lifting the Concrete Kibble, ensure the Chute is secured in its
storage/upright position by engaging the attached Anchor Chains into the chain hooks
provided.
Crane attachment procedure
A qualified person shall operate the crane and the Concrete Kibble shall be hoisted in a safe
manner.
Engage the Crane Lift Hook through the Lifting Eye at the top of the Lifting Bar as shown
in
Fig. 3.2
below.
Fork Tines
Securing Chain
Anchor points
(both sides)
Chute Storage/upright
position
