Easee Ready, Руководство по установке пользователя

Страница: 5 / 18

5
Read the entire manual carefully before installing
and operating the product. Observe the following
instructions:
Safety instructions for the installation
— This product shall only be installed, repaired or
serviced by an authorised electrician. All applicable
local, regional and national regulations for electrical
installations must be respected.
— Danger to life due to high electrical voltage. Never make
any changes to components or connecting cables.
— The installation must not be carried out in the vicinity
of explosive atmospheres or in areas where there is a
risk of flowing water.
— The product must be installed on a permanent
location. The connections of the backplate are
designed for a limited number of plugging cycles.
— The product must be installed on a wall or structure
with sufficient load bearing capacity.
— The product should always be installed on a surface
that covers the entire back side area of the product.
— The terminals in the backplate are energised when
the power circuit is closed and must never be in direct
contact or in contact with anything other than the
plug-in electronics (Chargeberry).
Safety instructions
Safety instructions for operation
— Danger to life due to high electrical voltage. Never
make any changes to components, software or
connecting cables.
— Never use or touch the product if it is damaged or
does not function properly.
— Always have the prescribed maintenance, installation
and any repair work carried out by an authorised
electrician and in accordance with local requirements.
— If a fire occurs, do not use water for extinguishing.
— Never clean the product with high pressure or running
water.
— Do not immerse the product in water or other liquids.
— Make sure that children do not play with the product.
— Even if the product is designed to withstand normal
weather conditions, we recommend protecting it
from direct sunlight or exposure to extreme weather
conditions.